|
| |
|
Introducing Cooper B-Line's F.A.S.T. TM Underfloor Cable
Tray System
|
|
[ Download Product
Brochure | Download
Instruction Sheet | View Press Release ]
[ View F.A.S.T. System
Flash Video ] 
Cooper B-Line's F.A.S.T. System is the most
Foldable, Adjustable and Stackable underfloor tray system on the
market...and it's Tool-Less!
This new system requires no tools, has fewer parts, and is simpler to
install than any other system on the market today! And, to save time and
installation scheduling headaches, it can be installed before the raised
floor is in place. 
System Features & Benefits:
- Tool-Less assembly of supports - Reduces installation time/cost
by eliminating the time required to bolt/screw hardware together or
bend tabs to assemble supports.
- Tool-Less splicing/mounting of tray to supports - Reduces
installation time/cost by eliminating the time required to
bolt/screw hardware together or bend tabs to secure the tray.
- Stands are independent of raised floor which enable the system
to be installed before the raised floor. Simplifies the installation
by reducing the amount of coordination required between the
electrical, communications and flooring contractors.
- Tray - The tray in the system is wire mesh and comes in the
following sizes:
Lengths - 24" and 48"
Depths - 2", 4" and 6"
Widths - 6", 12" and 20"
- Fitting - Flat fitting for turns reducing the installation
time/cost by eliminating the need to cut basket tray on the jobsite.
- Stands - The trays in the system are a patented design that
enables them to be Foldable, Adjustable (6" vertically) and
Stackable. Pre-galvanized steel construction. Available in the
following sizes:
Widths - 12" and 20"
Height Adjustment Range from the deck: 10-16:, 18"-24" and 25"-31"
- Accessories - Tool-less clips and supports that connect the tray
and add multiple levels.
Cantilever kits - Tool-less kits available in single and double
tier.
Hold down clip - Spring steel fasteners that enable tray to be
spliced and held down on stand with no tools.
Static Stands - Supports tray in raised floors that are 12" high or
lower.
|
|
|
|
|
|
F.A.S.T. System can be installed independent of the floor system.
|
Stackable to create multiple tiers.
|
No tools required for assembly.
|
|
|
|
|
|
Cantilever kit allows for multiple tiers without limiting access to
lower level.
|
Cantilever foot secures vertical support to stand easily without
tools.
|
Cantilever brackets are fully adjustable and require no tools to
install. Slide bracket up/down the vertical support and lock tabs
into position.
|
|
|
|
|
|
Vertical supports are marked in inch increments for easy alignment
and have a hinged locking collar to securely set the stand height.
|
|
Baskets can be laid on stands with a slight gap to allow for uneven
wire basket cuts. Formed basket guides on stands act as a stop guide
for the wire basket.
|
| F.A.S.T. Products Overview
|
 Wire
Basket Features:
- Rounded ends on all wires
- UL Classified (see technical data for details)
- Depths: 2", 4" & 6" nominal
- Lengths: 24", 48" & 118"
- Flat fitting for turns
- Wire diameter: 0.191" (4.9mm)
- Standard finishes: Zinc Plated & Pre-Galvanized -
Consult customer service for other available finishes.
Stands Features:
- No tools required for installation
- Formed top surface free of protrusions or sharp
edges
- 6" height adjustment
- Inside and outside leg positioning
- Folded and boxed for ease in shipping
- Patent Pending
- Stand part number includes:
One (1) Stand
Two (2) Feet
Two (2) Adhesive Pads
Two (2) Hold Down Clips
- Standard finish: Pre-Galvanized
 Cantilever Kits & Accessories Features:
- No tools required for installation
- Simple design for tiered applications
- Available in kits or individual parts
- Adjustable shelf height
- Formed top surface has no sharp edges
- Can be installed independent of raised floor
- Standard finish: Pre-Galvanized
Accessories:
Various clips, assemblies, clamps and other
accessories are available for the F.A.S.T. System. Refer to
Product Brochure
for more detailed information on the entire system! |
|
|
|
Cooper B-Line Introduces The VWM Single Piece Wall Mount
Enclosure
|
Cooper B-Line is announcing the
availability of a new wall mounted electronic enclosure product
line called the VWM Series. These new wall mounts are a cost
effective, practical and secure means of mounting communications
cabling, electronics and related equipment on a wall.
This easy-to-use enclosure was designed to meet the most common
19” rack mount datacom storage applications in today's
networking environments. Available in 24” and 36” heights (11U
or 18U of mounting space) and 12”, 18” and 24” depths, the VWM
has the options you need to mount your cabling, patch panels and
electronics on a wall in a limited space or low density
application environment.
Features:
- VMW frames feature fully welded, single piece, 18 gauge
cold rolled steel construction
- 24” overall width frame accepts 19” rack mounted
equipment
- 24” (11U) and 36” (18U) overall heights available
- 12”, 18” and 24” (11”, 17” and 23” usable) overall
depths available
- Includes one pair of fully adjustable EIA square hole
mounting rails and 50 M6 cage nuts and screws
- Includes a tempered glass door that is removable,
reversible, lockable and features 180 degree opening
- Includes removable, locking side panels for ease of
access to installed equipment and cabling
- Designed to help keep installed equipment cool with
adequate ventilation areas and easy adaptation to available
4.5” fan kit (2 x 105 CFM fans)
- Cable entry gland plate on top and bottom of the cabinet
allows for easy cable installation and maintenance
- Multiple cable tie lances on the rear of the cabinet for
cable tie points or accessory mounting
- UL listing pending to UL60950
- 150 lb. load rating
- Available in RAL 9005 black powder coat finish
Benefits:
- Value-driven pricing model that prices the VWM series at
least 35% less than a same-sized dual-hinge wallmount
- Inventoried item that is available from stock for quick
delivery
- The product's design features ensure ease of use and
applicability to modern datacom, security and networking
installations
|
|
|
Cooper B-Line Introduces New RCM+ Cable Managers
|
| Cooper B-Line is announcing the
availability of new products in the popular RCM+ cable manager product
family. These new products include a new line of extended depth
vertical cable managers and a new line of double sided horizontal cable
managers. The extended depth vertical cable managers utilize a new,
reinforced plastic cable management finger section that is 2.5" deeper
than the standard RCM+ finger section, which is designed to hold 33%
more cables than the standard RCM+. The reinforcement adds to the weight
carrying capacity, too, which is ideal when using RCM+ in high density
cabling applications using CAT6, CAT6A or shielded twisted pair
cabling. The double sided horizontal cable managers are designed to
offer a cable management pathway on both sides of a rack in the same RMU
space. They are also a cost-competitive solution, being less expensive
and easier to install than two single sided cable managers.
 Features of the new Extended Depth Vertical Cable
Managers:
- Used to provide a vertical cabling pathway for two-post and
four-post rack applications
- Constructed of an aluminum frame with UL 94V-0 plastic cable
manager fingers
- Extended finger depth adds 33% more cable carrying capacity
compared to the same-sized standard RCM+ vertical section
- Stronger plastic fingers are designed for use with heavier,
modern, high performance cabling media like CAT6, CAT6A and shielded
copper cable or fiber optic cable and have a radius edge on the
fingers to help control bend radius
- Ideal for use with angled patch panels
- SB860 Series managers feature high density finger sections on
both the front and rear side of the cable manager section
- SB864 Series managers feature high density finger sections on
the front of the cable manager and cable retention gates on the rear
of the cable manager to accommodate large cable bundles
- Two piece doors with snap-on hinges allow for quick opening from
either side or complete removal
- Open back design allows for free movement of cables from front
to rear cable manager sections
- Doors, cable retention gates, cable retainer bars, cable strap
mounts, push-in fasteners and mounting hardware are included
- Spools are included with the 10” and 12”W versions
- Available in Black or Silver powder coat finishes
Features of the new Double Sided Horizontal
Cable Managers:
- Used to provide a horizontal pathway for cabling on both sides
of a two-post rack in the same RMU spacing
- Steel frame with UL 94V-0 plastic cable manager fingers
- Rounded plastic cable manager fingers help control bend radius
- Snap-on, removable, hinged aluminum doors that opens past 180
degrees and remains open in the up position for convenient cable
access
- Stylized door that complements the look of the RCM+ system
- Open frame design allows for free movement of cables from the
front to the back of the cable manager
- Designed to work with all high performance copper and fiber
optic communications media
- #12-24 mounting hardware included
- Available in Black or Silver powder coat finishes
For more information about our new RCM+ cable manager products, download
the product bulletins CBLCOMMD18 and
CBLCOMMD19
from the
library or contact Cooper B-Line customer service at (800) 851-7415
or
blineus@CooperIndustries.com.
|
|
Cooper B-Line's New Quick-Connect Hinged Cover Wireway &
Accessories
|
|
[ Download Product
Brochure | Download Time
Study Document ]
 Features & Benefits:
- No Loose Hardware - Manufacturer installed cover and
connector hardware provides an easier and quicker
installation.
- Easily Removable & Reversible Hinging Screw Down Cover -
The removable and reversible cover provides flexibility and
improved cable access, while the screw connection provides
secure closure.
- Quick Connection Method - A slide-in connector with
manufacturer installed hardware eliminates the hassle of
handling hardware and attaching blind connections,
significantly reducing connector installation time (at least
a 75% time reduction). For time
study information, see Time Study
Document.
Application
- Houses runs of control and power cables
- Used for cable and wire junction, distribution and
termination.
Construction
- Patent Pending
- Body and cover are fabricated from code gauge steel (see
brochure)
- Body has mounting holes on the back
- Available with or without knockouts on the top and
bottom sides
- Fittings have no knockouts, ends are available with or
without knockouts
- Wireway exceeding 72 inches in length has two
overlapping covers
- Variety of fittings allow runs which can change
directions, junction and terminate
- Connectors (sold separately) have a unique gate feature
which can swing completely open allowing lay-in of wire and
cable
- Wireway adapter kits are available for connecting to
traditional Cooper B-Line screw and hinge cover wireway
systems
Standards
- UL 870 Listed, Type 1
- CSA C22.2 No. 26 certified, Type 1
- Conforms to NEMA standard for Type 1
- IEC 60529, IP30
Finish
- Wash and phosphate undercoat
- ANSI 61 gray acrylic electrocoat finish
|
|
|
